How to Fix No WiFi Networks Found Windows 10 PC
Fix No WiFi Networks Found Windows 10 PC. This article is about how to fix no wifi networks found error on windows 10 pc or laptop. Follow the given instructions and get rid of this annoying problem which you face while connecting to the internet through a wireless network connection.
We all know that one of the main things that come with a computer is the ability to connect to the internet. Typically, this connection comes through wireless networks and there are quite a few different ways in which we can configure or set up these connections.
There’s nothing worse than having your laptop say no WiFi networks found when you’re trying to access the internet. It can be very frustrating and most of us will resort to restarting our devices or even restarting the router that might provide the WiFi signal for you, but none of it usually works.
- 1 What Do You Do When Your Laptop is Telling You no WiFi Networks Found?
- 2 How To Fix No WiFi Networks Found Windows 10 PC Laptop
- 2.1 1: Restarting Your Router:
- 2.2 2: Uninstall Your WiFi Adapter Driver(you may not do this step):
- 2.3 3: Fix WiFi Adapter Driver Problems:
- 2.4 4: Check Your Wireless Adapter Properties (you may not do this step):
- 2.5 5: Reset Adapter Properties (you may not do this step):
- 2.6 6: Wifi Switch (you may not do this step):
- 3 Why can’t I see any Wi-Fi networks? My laptop doesn’t detect the wireless network in the area. What should I do? How do I fix it?
- 4 How do I fix this error: “no internet access. Check your network and modem settings.”?
- 5 No Wifi Networks Were Found After The Windows 10 Update
- 6 Conclusion
What Do You Do When Your Laptop is Telling You no WiFi Networks Found?
First thing’s first; don’t panic! There are different reasons why your laptop or tablet might be telling you that there are no WiFi networks available, and it’s worth checking them out before assuming that it is a hardware issue.
One of the first things to check is what type of wireless standards your device supports. There are several different standards that will mean your network card will use better wireless signals if your device supports them. These include:
This is something you can easily check on the Windows 10 PC by going to Control Panel > Network and Internet > Network Connections Right-click on your network connection and then select Open properties Go into the Support tab and you should see a list of wireless standards that your laptop supports
If you’re running an older version of Windows, such as Windows 7 or XP, then we would recommend downloading the Wireless Console 2 utility from Microsoft. This will allow you to view all of your connected wireless networks as well as some extra tools like reporting packets loss between your computer and router.
Another thing that might help if no WiFi networks are found is updating your drivers for both wireless devices on your laptop/desktop as well as those at the router you are attempting to connect to. There can sometimes be issues with old drivers which cause problems when trying to download new updates.
If you need help identifying the correct driver for your device, try visiting the website of your PC or laptop’s manufacturer and checking their support page by entering in either your model name/number or the type of wireless card that is installed. If these steps don’t work then it might be time to reset your Windows 10 operating system back to factory settings. To do this go into Advanced Startup options (usually through pressing F8 on boot) Choose Troubleshoot > Reset This PC > Remove everything but follow any prompts throughout so all personal files are wiped from the computer.
How To Fix No WiFi Networks Found Windows 10 PC Laptop
There are some methods which will help you how can fix it. These methods may vary from device to device but still, they work great for all devices without any issue and problem. So let’s see how you can easily fix no wifi networks found on your laptop and solve the problem:
1: Restarting Your Router:
Power Cycle Your Router First of all check whether your router is properly connected to the modem or not. You can also restart your wireless router by unplugging it for 50 seconds and then plug it back in again and see if it works properly. If not, try the next method.
2: Uninstall Your WiFi Adapter Driver(you may not do this step):
There are many users who have reported that simply by uninstalling their wifi adapter driver, they just fixed the problem of no wireless networks found on their laptop. So if you don’t want to follow the methods below or if you simply don’t have any idea about it, just uninstall your wifi adapter driver from the device manager.
3: Fix WiFi Adapter Driver Problems:
Device Manager Method In order to fix no wireless networks found problem, you have to update the drivers of your wifi adapter. So firstly open device manager from the control panel and find your adapter name from the list and right-click on it. And then go to the update driver option.
In this new window select the “Search automatically for updated driver software” option and check whether your wifi adapter is installed with the latest drivers or not. If yes, you are done otherwise follow the next method.
Advanced Method In case if you don’t want to use the first method or if your wifi adapter is not installed with the latest drivers, you can follow this method. By doing some changes in the registry editor, your wifi adapter will work properly and you can easily fix no wireless networks found on your laptop.
Fix WiFi Adapter Driver Problems If the problem is not fixed then try to uninstall your wifi driver adapter and restart your computer. After restarting your laptop, Windows will automatically install the latest wireless adapter driver for you.
4: Check Your Wireless Adapter Properties (you may not do this step):
Open Network & Internet From the control panel in windows 10. Open network and internet then click on the wifi option which is located on the left side of the window.
In this new window, you need to select your wifi and then right-click on it, and go to the properties option.
Now, in this new window click on the “Configure” option located under advance settings of your wifi adapter.
In that new popup windows check the property value which is given below:
Automatically connect to available networks = checked
Connect to a network even if it requires a key = not checked.
Now, click on apply button then reboot your computer and check whether the problem is fixed or not. You can also try connecting to another wifi network and see whether the problem is resolved or not.
5: Reset Adapter Properties (you may not do this step):
This method is very similar to point 4, but this time you have to reset your wifi adapter properties. Open device manager and go to the Network adapters section. Find your adapter name and right-click on it which will show you some options. Click on the “reset” option located under the action menu of that window.
Now reboot your laptop and check whether the problem is resolved or not.
6: Wifi Switch (you may not do this step):
This method will help you to fix no wireless networks found on your laptop. If you don’t want to install new drivers for your wifi adapter, then simply turn off and on the wifi switch which is given on the right side of the windows taskbar.
Now you can open network and internet windows and try to connect to any wifi, it will surely work for you.
What to do when no Wi-Fi networks found Windows 10?
Many Windows 10 users are confused with this situation when no Wi-Fi networks are found. The most common reason for this problem is the hidden wireless network which blocks our access to it. This guide aims to resolve this issue in a few minutes.
Why can’t I see any Wi-Fi networks? My laptop doesn’t detect the wireless network in the area. What should I do? How do I fix it?
Here are some common troubleshooting steps that have helped others solve the same problem.
First of all, make sure your laptop has a wireless card installed. You can check this by going to get an IP address from http://www.whatismyipaddress.com/ and plugging in your Ethernet cable to see if you have Internet connectivity. If you can’t browse the web, chances are that your laptop doesn’t have a wireless card installed.
If you have a wireless network card installed, try restarting your laptop.
Make sure all the cables are securely connected to both the modem and router. Sometimes simply unplugging it or cycling through ON-OFF on your router can help resolve this issue. However, some routers require that they be reset to their factory settings in order for them to work properly. In this case, you should contact your ISP to re-configure your connection settings before trying to reconnect.
You can also try going into your wireless access point’s admin page and seeing if the SSID for that network has been disabled. If it is, enable it and restart your router.
If you’ve restarted your computer and/or checked and double-checked all the cables and your wireless access point is already enabled, it’s time to turn to a more robust tool – Microsoft Windows Network Diagnostic Tool. This utility is capable of diagnosing many network issues on Windows XP, Vista, 7, or even 8 operating systems.
Open command prompt as administrator. Once open, type “netsh Winsock reset” without the quotes and then hit enter. Wait for it to complete before restarting your PC.
Once your computer has restarted, open the command prompt once again as administrator and run “netsh int ipv4 reset” without the quotes and hit enter. Then close the command prompt and restart your computer.
Once your computer has again restarted, open Windows Network Diagnostic Tool by typing it in your Start menu’s search box or opening the Control Panel and looking under Programs.
When you run the tool, click on “Advanced” on the left-hand pane to display all of the diagnostic functions. Click on “Tools” on the right-hand pane and select “Internet Connections”. Then click on “Troubleshoot problems…”. Restart your computer when prompted to do so.
The network diagnostics tool will attempt to work its way through any process that might be causing your connection issues. It may take a minute or two for it to complete, but you should notice that your Internet connectivity has been restored once the troubleshooting is done.
If you suspect that your router and/or modem could be at fault, we recommend contacting their respective manufacturer’s support teams for assistance as those devices are complicated and the only people likely to repair them are those who originally built them. Also, note that all AT&T-certified devices allow you to contact support directly from the MyWireless account page.
Once your wireless connection has been restored, make sure to run Windows Update (Start Menu – All Programs – Windows Update) to make sure all of your drivers are up to date and compatible with any changes that have occurred since they were last checked.
Finally, make sure to check the strength of your wireless signal. If you find yourself frequently losing or struggling with a weak connection, it may be time to consider upgrading your router or purchasing a new one altogether.
How do I fix my computer is not showing Wi-Fi networks?
The Wi-Fi adapter installed on your device may not be compatible with Windows 10. If you are running Windows 10, wireless LAN with the same SSID is visible on other devices but not yours. Please update your Wi-Fi driver to fix this problem.
Also, please make sure that the USB adapter installation utility is up-to-date for both devices with Windows 7/8 and 10. You can download the latest version of the USB wireless LAN adapter installation utility from the Microsoft website.
Other Wireless Adapter Troubleshooting Tips:
1) Make sure that you have a strong connection with your modem for Wi-Fi signals. If the signal strength is low, it may result in a slow Internet connection or no Internet at all. Please remember to restart your modem once a week to keep the connection strong.
2) The latest version of the USB wireless LAN adapter installation utility supports Windows 10. If you do not have the latest version, please download and install it from the Microsoft website.
3) Some older models of wireless adapters may cause this problem. For example, you see Wi-Fi networks on other devices but not your own. Please make sure that you are using the latest version of the wireless adapter.
4) Make sure that the SSID is enabled and visible to all nearby devices. For both Windows 7/8 and 10 computers. Please note that older Wi-Fi routers may have upgrade issues. When switching from network encryption key to Wi-Fi Protected Setup (WPS). After upgrading to Windows 10. If you can not find any visible networks on your device. Please disable the WPS option on the router and switch back to the network security key.
5) If you are using multiple routers in your home or workplace. Please make sure that SSID is enabled for all of them.
6) If your router uses multiple SSIDs. Please make sure that all of them are enabled for Windows 10 computers.
7) Please remember to update the driver for the USB wireless LAN adapter regularly as it is an old device model. The latest version of the USB wireless. LAN adapter installation utility will automatically recognize the correct driver and install it.
8) If you are using a USB hub to connect to the router, please check if there is a power supply for the USB hub. The signal may be weak due to a lack of power supply. Please remove all other devices and use only one wireless adapter at a time.
How do I fix this error: “no internet access. Check your network and modem settings.”?
I am getting this error message when I open Microsoft Edge: ‘No Internet Access. Check your internet connection.’ Sometimes the page opens but there is no data on it. Other websites do not work either. I have a 100/20 Mbit cable connection, a new modem, and a new router. I am using a Netgear R6200 WiFi Router and my system is running Windows 10.
On some devices, you may encounter this problem when the device has been in a low-power state for too long. The Wi-Fi adapter will not turn on automatically in order to save power consumption. Please try pressing Fn+F2 when the device is turned on to turn on the adapter.
You can also try powering down your modem when this issue occurs, then restarting it after about one minute. If you are using a router, please restart both your modem and router together for 10 seconds or so.
No Wifi Networks Were Found After The Windows 10 Update
I recently updated my Acer laptop to Windows 10. My wireless connection worked fine before updating, but now I can’t find any wifi networks (despite the network adapter saying it’s connected). The wifi card also says that it has an excellent signal. However, when trying to connect to the internet I get the message “There isn’t a connection that has the properties I’m looking for”. I have also tried resetting my wifi adapter but this has had no effect. Any suggestions on how to fix this problem would be greatly appreciated.
The problem lies in the lack of compatibility between your computer and the Windows 10 OS. It is not enough to satisfy all the requirements we might need for our PCs. As a result, we experience issues such as this one: no wifi networks found after windows 10 update.
First things first: I recommend updating drivers for WiFi network cards. Many times the lack of compatibility with the new Windows version is due to drivers. Here you can find how to update drivers in Windows 10.
Now let’s take a look at what other solutions you can use depending on the error code you are receiving. If there isn’t any wifi network found, make sure your wireless card has not been disabled (it may have happened when you switched to Windows 10).
To do so, open the Device Manager. You can access it by pressing simultaneously Windows key + X and choosing Device Manager from the list. Expand Network adapters, right-click your adapter, and choose Enable. Also, enable scanning (both options below your adapter name) to add the wireless connection.
If there isn’t any wireless network found, make sure the other computers are not blocking you. Just move closer or check other places where your router may be placed. If you have other devices using the same connection, either ask their owners to switch off for a while or connect them via cable. Also, try changing WiFi channels in case it has been set to a channel that does not have any available networks. You can do so from your router’s settings page, accessible by typing the IP address of the connection into a web browser.
On another hand, if you can’t connect at all even though there is a network found, try restarting Windows and checking the Network adapter settings. A lot of times the issue is either solved by restarting your computer or resetting network adapters. To fix this problem, simply open Control Panel and click on View Network Status and Tasks under the Network and Internet section. You may also go to Change adapter settings. Here you can right-click your network adapter and select Disable. Then make sure to restart your computer to let Windows reinstall the default drivers for this device.
Afterward, right-click your network adapter again and choose Enable. Right-click it once more and select Properties. Go to Internet Protocol Version 4 (TCP/IPv4) and click on Properties. If you have a different IPv version, make sure you choose that one. In the General tab, select Use the following IP address. Enter an available IP from your router and a unique Subnet mask. Lastly, set a preferred DNS server (this should be either provided by your ISP or 220.127.116.11 if you don’t have this information).
If all of these things do not help you, then this means that your Windows 10 version is not compatible with your wifi card. Use another computer to download all available drivers for the wireless network card and install them on yours. Restarting Windows may work after the driver installation as well.
If nothing of these helps you can always contact Microsoft Support. Also, there are numerous forums on the internet where you can ask for help.
If you’re having trouble connecting to a WiFi network on your Windows 10 PC. There are some great troubleshooting steps that will help. First, check the physical connection of your Ethernet cable or wireless card. And make sure it is inserted correctly into its slot (note: this may be different depending on which type of computer you have). Next, try restarting your computer and see if any new networks show up. You can also open Command Prompt as an administrator and run “netsh wlan show drivers” to make sure all of the necessary components for WiFi connectivity are installed properly. If none of these solutions work for you. We recommend checking out Microsoft’s article on getting online without WiFi here -support.microsoft.com